HomeEquipmentPartnersContact

MISCELLANEOUS EQUIPMENT

 

BIRD LINE

To protect your fish farm from predators such as cormorants, herons, gulls etc. Standard constructions consist of wooden poles, which are connected via wire and polyester strings. The polyester string is connected via special clips to the wire every 12 -15 cm.


Available as single components or as a complete system (on request).

 


Bird netting

NOISEMAKER FOR SCARING BIRDS


Effective, mains-independent apparatus, progane gas-driven, battery control.
Approx. 86 dB(A) at 100 m distance in shooting direction guarantee protection against predator birds over an area of approx. 1 -5 hectares.
Available in 3 versions,complete with control unit for 3-fold shooting.


 

bird scarer
   

FISH SCALES

Stainless steel platform scales.

AquaZOR – the professional scale for routine weighing on fish farms.

The robust and intelligent solution for weighing on fish farms.

The scale is delivered with handles for easy carrying. The display and weighing platform are connected by easy-plug connections and can be separated from each other at any time.


Functions:

  • Tare-function with automatic single weighings (e.g. a person with a hand net is stepping onto the platform and it's weight is set to TARE first. After that the scale is summarizing each filling of the net)
  • Indication of the total weight (sum of the individual weighings) number of individual weighings
  • Acoustic signal at each individual weighing -
  • Range 0 - 200 kg-graduation

Material: Platform made of stainless steel, display with integrated Rechargeable Accumulator, display can be easily taken off for recharging or safety reasons

Dimensions: Platform approx. 40 x 50 cm

Weight: Approx. 30 kg

Calibration: Scale cannot be officially calibrated, it is supposed for internal farm purposes.

scales

 

HANGING NEEDLE SCALE

DATA SHEET:

Type 117-10 117-25 117-50 117-100
Range 0-10 0-25 0-50 0-100
Division 50g 100g 250g 500g
scales

 

FIRZLAFF BOX

A new system for the incubation of salmonid eggs in
natural waters, an optimum solution for the incubation of
smaller egg quantities or when a hatchery is not available.
The box is installed at a suitable place in the brook and
offers perfect protection and optimum incubation conditions
for the eggs. Capacity up to 7.500 eggs. Constucted from stainless steel.

firzlaff box

 

FIAP STUNNER

30, 150, 400 Kg capacity

  • Conforms with the requirments of legislation on the prevention of cruelty to animals and food hygiene.
  • Fish slaughtering equipment, complete, ready to connect with container and grid electrodes.
  • Container light and easy to clean.
  • Electrode frame easy to remove.
  • Electrical connection: 23V AC.
  • Active current: 63V AC.
  • Protection class: IP 54.
Fitted to VDE 0100 (agricutural facilities).

30 mA isolating transformer to protect humans from harm inside the slaughtering container.
Design: with automatic shut-off and illuminated display.

stunner

 

COOLERS/HEATERS


The product line of SK flow-through coolers were designed
for cooling aquariums and holding tanks with volumes
from 200 to 7.000 liters. Environmentally-friendly, using
refrigerant 134A, the units also have high safety standards.
The coolers are perfectly suitable for use in seawater. The
TITAN model comes with a heat exchanger made of titanium (not to be used for cold water systems); model SK has
a plastic heat exchanger. All models are supplied with an
integrated digital temperature controller. 230 V/50 Hz~1.


Aquaclim ®type coolers are designed for the precise temperature
regulation (cooling and cooling/heating) of fish tanks. The instruments are installed outdoors, close to the technical facilities,as a bypass to the filtration circuit. Components of the system are:titanium water evaporator,air condensor, compressor, thermostatic regulator, digital control thermostat,anti-frost thermostat, corrosion-proof housing.

coolers


 

TANK HEATERS

Titanium tube heaters and tube heater control.

heaters

 

 

PROTECTIVE CLOTHING

Oceon

protective clothing

THE CLEARWEED WATER WEED CUTTER

The Clearweed has been specially designed to quickly and easily cut away weed without fouling in rivers, canals and ponds, both upstream and down stream.

  • Its spring steel blades are serrated on both edges and as each blade is twisted there is always a cutting edge presented to the weed.
  • Extremely light, a set of nine blades weighing under 5kg including the chains.
  • Clearweed is easy to handle and can be carried in a car boot.
  • Cutting upstream, all weeds can be cleared by using Clearweed on the riverbed.
  • Cutting down stream a controlled amount of weed, if needed to provide aquatic life and cover for fish, can be left.
  • The slower the Clearweed is used the deeper the cut.
  • Made up in 3' sections the standard cutter is 27' in length.
  • Addition cutter sections available (please ask)

SCREENING
Selection of nylon and metal screen products available.

 

FOR FURTHER EQUIPMENT ETC,
SEE OUR PARTNERS PAGE

 

weedcuttes
   

HOME | EQUIPMENT | PARTNERS | CONTACT    

contact
^ TOP